Automotive Industry News & Information - Frank May Garage

When driving around town, your family car engine needs clean air to burn the fuel – and it needs a lot. In fact, a typical vehicle needs about 216,000 gallons of air for every tank of gas.

All that air passes through a filter that catches the dust and dirt. Eventually the filter gets completely full. Because the filter can only hold so much, dirt starts getting through. This dirty air passes through the mass airflow sensor, and starts to accumulate on the delicate sensor element. The mass air flow sensor measures how much air is getting into your engine. When the airflow reading is incorrect, your family car engine doesn’t get the proper amount of fuel. It runs rough and doesn’t perform as well as it should.

We do our best to budget for scheduled vehicle maintenance and it is hard to plan for unexpected family car repairs. The truth is that our vehicles can stay on the road longer than ever before with proper maintenance. That’s because of improved vehicle design and manufacturing quality. But some of those same improvements also lead to higher repairs costs for every family car or vehicle.

There’s a tool that can be found on Edmunds.com that you can use to prepare your service and repair budget. Let’s suppose you have a used Toyota Camry – a very popular car in the area…

Helpful Tips & Information: An average of 13,000 Americans are killed between Memorial Day weekend and Labor Day, some as a result of unperformed vehicle maintenance, according to the National Highway Traffic Safety Administration. Each year, neglected maintenance leads to more than 2,600 deaths, nearly 100,000 disabling injuries and more than $2 billion in lost wages, medical expenses and property damage.

Most mechanical failures can be traced to neglected maintenance. For example, the U. S. Department of Transportation reports the leading cause of mechanical breakdown on our nation's highways is overheating, a condition that is easily avoidable. Other deficiencies that are simple to detect include low antifreeze/coolant, worn or loose drive belts and defective cooling system hoses.

Before you buy your next light bulb you should know the ins and outs of halogen bulbs! Most new-model vehicles have halogen headlights because they produce more light than a regular bulb. Be careful: like all halogen lights, touching the glass bulb means that bulb is contaminated with oil that can heat up and cause burnouts more quickly.

Frank May Garage in Akron now offers the Nissan VQ35DE V6 Engine with our partner Jasper Engines & Transmissions, the nation's leading re-manufacturer of drive train components, continues expanding into the import industry. The Nissan VQ35DE, a 3.5L DOHC V6 with variable valve timing (VVT), is available for engine replacement for the following Nissan vehicle applications:

2002-2006 Altima
2002-2008 Maxima
2002-2007 Murano
2003-2006 Quest

Jasper Engines & Transmissions, the nation’s leader in remanufactured products, announces the availability of its re-manufactured Toyota 1MZ-FE 3.0L engine. This DOHC V6 engine is available in exchange for 1994-2006 (Toyota Camry, Avalon, Solara, Sienna, Highlander | Lexus ES300, RX300) vehicles.

AC, Car Battery and More Care Tips
1. Run your AC in winter To keep your car’s air-conditioning system fit for the next warm season, run it a few times throughout the winter. This will prevent moving parts in the compressor from seizing. Also, circulating the refrigerant will help keep the seals soft and pliant.

Car Engine and Other Systems Care Tips
1. Check engine oil at every other fill-up For an accurate reading, follow this procedure:

Run or drive your car for about 15 minutes to warm the oil; then park the car in a level place.Turn off the engine and wait 15 minutes to allow the oil in the engine to drain back to the oil pan.
Remove the dipstick and wipe it clean with a paper towel or rag. Reinsert the dipstick, being sure to push it in all the way, then pull it out again to check the oil level. It should be somewhere between the hash marks on the dipstick.
Add the type and amount of oil as specified in your owner’s manual, if necessary.